This free DIY Swarovski Crystal jewelry project is an eye-catching multi-stranded bracelet highlighting the New Fall/Winter innovations! It features gorgeous color combinations in an array of peacock type hues that are especially on trend in the cooler months.
Swarovski Crystals used in this jewelry project:
Swarovski 5328-6mm Xilion Bicone Beads in Crystal Rainbow Dark 2X ~ 70 Pieces
Swarovski 5040-6mm Rondelle Beads in Crystal Rainbow Dark 2X ~ 47 Pieces
Swarovski 5051-8x6mm Mini Oval Beads in Amethyst ~ 204 Pieces
Swarovski 5051-10x8mm Mini Oval Beads in Emerald ~ 4 Pieces
Swarovski 5728-12mm Scarab Beads in Amethyst ~ 4 Pieces
Swarovski 5514-8x8.5mm Pendulum Beads in Emerald ~ 8 Pieces
Swarovski 5045-6mm New Rondelle Beads in Emerald ~ 8 Pieces
Swarovski 5045-4mm New Rondelle Beads in Emerald ~ 2 Pieces
Supplies:
2 Beaded 5-1 End Bars
TierraCast® 94-3056-18 or similar end bars
4 6mm round copper jump ring
10 2mm crimp beads
10 3mm crimp covers
1 copper lobster clasp
10” beading wire
Instructions
Step 1: Cut beading wire into 5 10” pieces. Using one piece of beading wire slide on one crimp bead and crimp to the #1 loop on the beaded end bar. Attach crimp cover. Slide on one 5328 6mm, one 5045 6mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5514 8x5.5mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 8x6mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5514 8x5.5mm, three 5040 6mm, one 5514 8x5.5mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 8x6mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5514 8x5.5mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5045 6mm, one 5328 6mm, and one 5045 4mm. Now slide on one crimp bead and crimp to #1 loop on the other beaded end bar. Attach crimp cover.
Step 2: Using one piece of beading wire slide on one crimp bead and crimp to the #2 loop on the beaded end bar. Attach crimp cover. Slide on one 5045 6mm, one 5040 6mm, one 5328 6mm, one 5051 8x6mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 10x8mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5728 12mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5728 12mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 10x8mm, one 5328 6mm, one 5040 6mm, one 5328 6mm, one 5051 8x6mm, one 5328 6mm, one 5040 6mm, and one 5045 6mm. Now slide on one crimp bead and crimp to #2 loop on the other beaded end bar. Attach crimp cover.
Step 3: Using one piece of beading wire slide on one crimp bead and crimp to the #3 loop on the beaded end bar. Attach crimp cover. Slide on three 5328 6mm, three 5040 6mm, three 5328 6mm, three 5040 6mm, three 5328 6mm, three 5040 6mm, three 5328 6mm, three 5040 6mm, three 5328 6mm, three 5040 6mm, and three 5328 6mm. Now slide on one crimp bead and crimp to #3 loop on the other beaded end bar. Attach crimp cover.
Step 4: Repeat Step 3 using the #4 holes and repeat Step 2 using the #5 holes.
Step 5: Attach 3 jump rings to create a small chain at one end of the beaded end bar. Using one jump ring attach the lobster clasp to the other end.